PLASTICIZER

Product Details:

- It is Colorless, clear and practically anhydrous Liquid

- It is having hardly noticeable odor

 Uses

 

Non phthalate plasticizer is listed for use in food contact and medical application.

 

Additional Information:

• Packaging Details: 200 Kgs MS DRUM

Product Details:

DOS is almost colorless and oily liquid, free of foreign materials.

Uses:

DOS is a plasticizer for PVC, and its copolymers, nitrocellulose’s, styrene resins and synthetic rubbers where low temperature performance is required. The end applications include anti-frosting cable and PVC linoleum.

Product Details:

DOP is mostly clear oily liquid. it is a general-purpose plasticizer. It has all the properties required for pvc processing.

Uses:

it is widely used as a plasticizer for PVC cables and wires, leather cloth, perfume fixative, adhesives, floor coverings, nitrocellulose, films, calendars, synthetic & natural rubber, synthetic & natural resins, and drying oils.

Product Details:

Chlorinated Paraffin is viscos slight yellow to dark yellow oil liquid CPW is a secondary plasticizer.

Uses:

CPW is used with PVC as secondary plasticizer. It’s used in wire, leather cloth, adhesive, coating etc industries.

CPW comes in different solid contains from 45 % to 62 %   

Product Details:

DBP is near to colorless, odorless or slight aromatic, ester odor oily liquid.

Uses:

It is an excellent low cost plasticizer, it is used in some protective coatings and vinyl base adhesives etc

 

Additional Information:

• Item Code: P004

Product Details:

DOA is a light colored, oily liquid. It is flexible at low temperatures, has good electrical properties and good stability to heat.

Uses:

To produce clear films for food packaging.

Product Details:

We have no phthalate plasticizer replaces all Plasticizer like DOA, DOS , DEP , DOM , DBM ,DOP , DBP. Our product reduces toxicity of plasticizer and gives better result .

Product Details:

DOM is clear, colorless oily liquid with characteristic '' ester '' odor.

Uses:

DOM used in emulsion paint, paper and textile coating, adhesives, oil additives and surfactant.

Product Details:

DBM is clear, colorless and almost odorless liquid.

Uses:

 It is used as co-monomers with the vinyl acetate for synthetic adhesives, it can also be used with PVC

Product Details:

- Unique non-phthalate plasticizer for sensitive application.

- Unique performance comes along with an excellent toxicological profile and low migration rate

- It is Colorless, clear and practically anhydrous Liquid

- It is having hardly noticeable odor

Uses

Non phthalate plasticizer is listed for use in food contact and medical application.

Flexible PVC applications like medical devices, toys, food packaging, flooring, wall covering, sport and leisure products

Storage & Handling Hexamoll DINCH can be stored in tanks and drums constructed from normal carbon steel, e. g. A 283 grade. If severe demands are imposed on the product quality, we recommend that it be stored in tanks constructed from stainless steel, e. g. AISI TP 316 Ti (German steel No. 1.4541) or aluminium (AlMg3). It is recommended that steps be taken to ensure the exclusion of atmospheric moisture, e. g. by storing under a blanket of dry nitrogen, as otherwise the product quality may deteriorate, e. g. the water fraction may rise, or the Hexamoll DINCH may be discolored by rust in normal steel tanks. Drums containing the product should be kept tightly closed in a wellventilated place. Hexamoll DINCH can be stored for one year in its original packaging at temperatures below 40 °C, if moisture is excluded. Only dedicated equipment should be used to discharge this product.
Safety When using this product, the information and advice given in our Safety Data Sheet should be observed. Due attention should also be given to the precautions necessary for handling chemicals.